• Metal Buildings, Steel Buildings

  • School / Church Gutters

  • Commercial Buildings

  • Industrial Buildings

  • Large Custom Gutters Commercial or Residential

  • Super Gutters and Pool Screen Gutters


When fitting gutters with GutterBrush, you would like to fil the gutter s best as possible without overly compressing the other bristles. It is desirable, however, not necessary, for the brush to have a "crowned" or "raised profile" higher than  the outer edge of the gutter, so that the wind can purge leaves, however achieving the raised profile is not always possible for the following reasons:


Many metal building gutters have an outside edge that is actually higher than the roof drip edge, thus in such a situation it would not be desirable to have a raised
profile higher than the outside edge.


With many of these gutter styles, the width of the gutter is a different dimension from the height, thus the raised profile may not be achievable because the brush profile is round.

Example: a gutter that is deeper than wide, may not be able to achieve a raised profile.
GutterBrush is, in itself, a protected flow channel so it will work well even without the raised profile.

In order to decide which GutterBrush will work best inside your gutter, you can measure the inside dimensions to determine which GutterBrush product will best fill your gutter without overly compressing the bristles.

Such can be a challenge because many of these gutters have complicated shapes with multiple angles and corners. The best way to be sure you purchase the optimal size is as follows:

1. Purchase our commercial sizing sample pack ( SKU smp-com )which contains 6" length samples of our three largest sizes. These samples are free of charge with . limit of one per customer, however we do ask for a payment to ship these samples (currently $8.95 to ship).

2. When you recieve the samples, set each one in the gutter and decide which size best fills the gutter without overly compressing the bristles. Be careful to purchase the commercial sizing samples      and not the residential. Click here to go to Sizing samples

3. Another option is to print our sizing chart and use the chart to (scissors) cut out circles that match the diameter of our brushes, set these circles
into the gutter to determine the best fit. Click here to go to the sizing chart.

Give us a call for support and advice 888-397-9433

Customers love GutterBrush for their metal building gutters because installation is simple and it works great.

People with these types of gutters are very limited, other gutter guard products
are not appropriate for those scenarios, do not fit, or require labor intensive work in order to customize the gutter
guard to fit.

Unfortunately, when such a gutter clogs and fills up with water, often the gutter leaks
backwards into the building because the back edge is lower, therefore the natural path of least resistance is for the
water to leak back into the building.

Most metal buildings have gutters which the front dge of gutter is much
higher than the back edge of the gutter and also higher than even te roof drip edge; they are built
this way for aesthetics, so that when looking from the ground you do not see the ribs of the roof. In other words,
the building looks better with such a gutter.

For this reason, these customers love GutterBrush because they need a system to keep the gutter from cloggin so they can avoid leakage.