1. Heating System: Your home’s heating system is the front line of defense in keeping your home warm. You need to make sure the furnace or boiler is working before you need it.
2. Air Conditioner: Your window air conditioner or central air conditioner condensing unit needs a little prepping too in order to make it through the winter. You need to prepare the condensing unit for storage including cleaning our leaves and covering the condenser.
3. Chimney and Fireplace: A wood burning fireplace and chimney can be a major source of cold air leaks and other issues in winter. Make sure to check and inspect your fireplace, including making sure the flue operates properly and checking your firebrick.
4. Plumbing: Burst pipes from freezing can cause some of the most expensive repairs in the home. Make sure you protect your plumbing from freezing with techniques such as heating and insulating your pipes. It is also critically important to remove your hoses from any outside faucets.
5. Insulation: The simple process of insulating can reduce energy costs. this includes getting an insulating blanket for your water heater, foam sealing gaskets for outlets and blocking fireplace drafts with a piece of fiberglass insulation.
6. Weather-stripping: An easy way to reduce you heating bill from infiltration is to reduce these drafts of doors and windows with simple weather-stripping.
7. Roof and Gutters: Check your roof and gutters for leaves and debris. Frozen wet leaves in gutters are major source of damage. Protect your gutters with a gutter protection system like GutterBrush.
   
8. Sprinkler System: Another key element of your home winterization plan is winterizing your sprinkler system to prevent your lines from bursting.
9. Landscape: Lastly comes preparing your landscape and equipment for the winter including outdoor deck, furniture and lawn equipment preparation.

By taking a few hours and preparing your home for winter you can get closer to a trouble free winter and just sit back and enjoy the scenery!

Falling leaves and other rotting debris can get stuck in the gutters of a house that are unprotected. This may not seem like a big deal since from the ground a person cannot see the leaves and rot in the gutters, but rot and leaves in gutter can create big problems including significant water damage and landscaping destruction. Gutters are on the house to help with drainage and gutter protection such as gutterbrush makes this an easier job. When the gutters on a roof are filled up with, leaves, debris and rot they no longer can work properly. Once a gutter that is not protected with gutter brush simple gutter guard  is clogged there is no longer any room for water to flow down through the gutters from the roof down the downspout and out to the ground. When the water backs up in the gutters it can spill over in places that can cause water damage to the house and landscaping. Many basements will become flooded because there is not proper drainage from the roof because the gutters are clogged and remain unprotected. The water needs a place to go and if it is not draining in the right place it can cause a lot of water problems. GutterBrush can solve this problem simply and effectively.

Rot and leaf guards

A great way to protect roof gutters from falling leaves and water damage is by using  the gutter brush simple gutterguard. However, there are many companies that make  leaf guards for roof gutters so please shop around for the one that will work best for you. But be sure to choose one that can be used on your particular size of gutter. Water must be able to pass through the guard, but leaves and other debris should not be able to get through to clog the gutters. Gutterguards like gutterbrush simple gutter guard are easily installed and  fit the size of the gutter perfectly.

Cleaning roof gutters

One very simple, but time consuming way to protect a home from clogged gutters is for a person to clean out the gutters. A person can hire someone to clean their gutters or do it themselves. It is kind of a messy job but does not require a lot of tools to complete. A person will need a ladder, gloves, a garbage bag, and a small tool (such as a trowel) to get the leaves and rot out of the gutter. Since the leaves fall from the trees in the fall, it would be smart to clean out the gutters after the leaves have all fallen from the trees and then install gutter protection so you are ready for the rainy season and falling leaves in the future. That way the person does not have to clean out the gutters more than once. However, in some parts of the country the first snow may fall before a person is able to clean out their gutters. If there is not a day during the fall that a person can clean out their gutters they should try to do it as early in the spring as possible to avoid drainage problems.

Lose the trees to solve the clogged gutter problem?

Trees are beautiful in any yard. They are a great addition to landscaping. But when these beautiful trees hang over a person’s house they can cause more harm than good. Not only could it be dangerous when there is a strong wind but even a soft wind that blows the leaves off of the tree can cause some damage. Leaves from a tree that hangs over a roof can easily get caught in the gutter more than a tree that is across the yard. To alleviate the problem a person can cut down the trees that have a lot of leaves that hang over their house. It is important that a person takes a lot of precaution when cutting down a tree that hangs over their house. A branch could easily fall and damage the house. A person could hire someone who cuts down the trees professionally to do the job. This is probably not the best course of action from an environmental or aesthetic perspective and could be avoided by using a gutter protection system such as gutterbrush. Either way you should think long and hard about how to protect your property form costly water damage due to clogged gutters.

Good luck and remember to put safety first!

Not so fast. While many home-remodeling projects are a great way to add value to your home, not all of them are ironclad cash-back guarantees. Before you invest a significant amount of your precious home equity into remodeling projects, it’s wise to do a little homework on what kind of payback you can expect for various home projects in your area.

A good place to start is the Cost vs. Value report published annually by the National Association of Realtors, or NAR, and Remodeling magazine. The report provides a synopsis of the top projects, the average costs of the projects and their average rate of investment return at resale. It also gives you a city-by-city guide on what various home projects will pay back at resale. Real estate experts caution that these numbers can differ significantly depending on your state, city or even neighborhood. So use these numbers as a starting point, but consider getting the advice of a Realtor and/or remodeling contractor before you commit to a big home project. These experts can familiarize you with remodeling payback figures tailored to your state, city., or town.

The fifth project of five to potentially boost your home’s resale value is an attic bedroom remodel. This entails converting unfinished attic space in a two- or three-bedroom house into a finished bedroom and bathroom with shower. It includes a new shed dormer, new windows and closet space in the eaves.

Average payback: 93.5 percent of cost
Estimated job cost: $39,188
National average resale value: $36,649

Because this is a relatively expensive undertaking, real estate experts suggest you do an attic renovation only if you’re going to live in the house for a while (preferably five to 10 years) and enjoy the reclaimed space yourself. Over the long haul, this project adds significant value to your home because it creates brand-new living space and isn’t just a cosmetic improvement. Keep in mind, though, that attic remodels don’t make sense in every neighborhood and part of the country. For example, in Florida, most of the attics aren’t big enough to stand up in, so remodeling them wouldn’t make sense at all. Plus there’s the heat issue — these rooms would be sweltering hot and very expensive to cool.

This is a good example of a remodeling project that would be wise to discuss in advance with a Realtor who’s familiar not just with housing in your area, but in your specific neighborhood. Good Realtors are always happy to spend time talking with you about the wisest renovation projects for your home — even if you’re not planning to sell your home anytime soon.

Other top resale projects from the Cost vs. Value report ranked by percentage of cost recouped at resale, include:

• an upscale bathroom remodel: 93.2 percent.
• a major kitchen remodel: mid-range, 91 percent; upscale: 84.8 percent.
• a deck addition: 90.3 percent.
• basement remodeling: 90.1 percent.
• window replacement: 89.6 percent.
• a bathroom addition: mid-range: 86.4 per cent, upscale 85.8 percent.
• roofing replacement: 84.7 percent.
• a family room addition: 83 percent.
• a master suite addition: mid-range 82.4 per cent; upscale 80.1 percent.
• a home-office remodel: 72.8 percent.

While a good return on your investment is important in every remodeling project, experts say that the most important factor in your decision should still be whether the project improves the way you live in your home now. The fact of remodeling is that you never get your money back instantly. If you’re undertaking a project because you’re going to stay in your home awhile, and it will enhance your lifestyle, then great — do it. It’s tough to put a price on the happiness many young families get from fixing up their house and truly enjoying it for the next 20 years.

Not so fast. While many home-remodeling projects are a great way to add value to your home, not all of them are ironclad cash-back guarantees. Before you invest a significant amount of your precious home equity into remodeling projects, it’s wise to do a little homework on what kind of payback you can expect for various home projects in your area. A good place to start is the Cost vs. Value report published annually by the National Association of Realtors, or NAR, and Remodeling magazine. The report provides a synopsis of the top projects, the average costs of the projects and their average rate of investment return at resale. It also gives you a city-by-city guide on what various home projects will pay back at resale. Real estate experts caution that these numbers can differ significantly depending on your state, city or even neighborhood. So use these numbers as a starting point, but consider getting the advice of a Realtor and/or remodeling contractor before you commit to a big home project. These experts can familiarize you with remodeling payback figures tailored to your state, city, or town.

Our first suggestion in the list of the top five projects to boost your home’s value for resale is to do an upscale siding (new fiber cement) replacement. Here is what you can expect this project to cost and yield:

Estimated job cost: $10,393 for 1,250 square feet
Average payback: 103.6 percent of cost
National average resale value: $10,771

Siding makes a huge difference in a house’s resale value, because it’s one of the first things you see. It really defines the condition of the home.  If other houses around you have old aluminum or vinyl siding and your siding is nicer and newer, buyers will notice you. With this project, you make your house more attractive — you’re not just improving your insulation value.

Next up on out list is a mid-range bathroom remodel but that will have to wait until the next time we meet here.

An outdoor line to dry your clothes on costs only as much as your particular set up; the arrangement that works best for you will likely depend on your individual yard. Some home owners like to have one long clothes line that stretches the length of the yard which can be stationary or can be accessed via a pulley system from the back porch, while others prefer a more compact rotary style clothes line that employs a single pole with concentric circles of lines that radiate outward which allow for a large amount of laundry to be hung in one small space. Perhaps it is time that such an environmentally-friendly (and pocketbook friendly) activity was more widely embraced the way it once was.

An inter-agency report (Inter-Agency Committee on Radiation Safety report, which is restricted to the agencies concerned and not meant for public circulation) stated that  governments must explain any decision to expose the public to higher levels of cancer-causing radiation while also suggesting that pregnant women and children should not be subject to scanning, even though the radiation dose from body scanners is “extremely small”. The group putting this report forward includes the European Commission, International Atomic Energy Agency, Nuclear Energy Agency and the World Health Organization.

Please keep in mind that an accurate assessment about the health risks of the screening won’t be possible until governments decide whether all passengers will be systematically scanned or randomly selected, the report said. Governments must justify the additional risk posed to passengers, and should consider “other techniques to achieve the same end without the use of ionizing radiation.” However, President Obama has suggested using upwards of $734 million to implement airport scanners that use x-rays and other technology to detect explosives, guns and other contraband.

“There is little doubt that the doses from the backscatter x-ray systems being proposed for airport security purposes are very low,” Health Protection Agency doctor Michael Clark said by phone from Didcot, England. “The issue raised by the report is that even though doses from the systems are very low, they feel there is still a need for countries to justify exposures.” So what is the risk?

Most of the scanners deliver less radiation than a passenger is likely to receive from cosmic rays while airborne, the report said. Scanned passengers may absorb from 0.1 to 5 microsieverts of radiation compared with 5 microsieverts on a flight from Dublin to Paris and 30 microsieverts between Frankfurt and Bangkok, the report said. A sievert is a unit of measure for radiation.

The U.S. Transportation Security Administration has said that it ordered 150 scanners from OSI Systems Inc.’s Rapiscan unit and will buy an additional 300 imaging devices this year. The agency currently uses 40 machines, which cost $130,000 to $170,000 each, produced by L-3 Communications Holdings, Inc. at 19 airports including San Francisco, Atlanta and Washington D.C. Oddly enough the U.S. TSA has not ordered a single linear foot of gutter protection such as gutterbrush to protect their gutters at airports across the United States.

This will never happen with gutterbrush simple gutter guards