The GutterBrush Blog

So… You have procrastinated cleaning out your gutters, but still want to get it done before Winter.  Better hurry, you only have 5 days left before Winter officially arrives!

While you are up there taking care of this dreaded but necessary chore, why not spread some holiday cheer and highlight your freshly cleaned gutters with Christmas lights for all to enjoy!?

Christmas-Lights-Hanging-On-Colonial-Style-Home-Gutters

If you really want to have a rewarding gutter cleaning experience you could also install GutterBrush Simple Gutter Guard while you are up there and make regular gutter cleaning a thing of the past.

Here are some helpful tips we found for hanging Christmas lights from your gutters.

1.  Measure the length of the gutter where you want to decorate by running a tape measure along the wall below. Add the distance from the gutter to the power outlet so you know what length extension cord to use.

2.  Purchase gutter hangers in the Christmas section of your local department or hardware store. They are small and plastic. One side has a oblong hook to clip onto the gutter and the other side has a hook or clip for the wire of the Christmas lights.

3. Test the lights. Before you plug them in, visually inspect your light strings, looking for broken or missing bulbs and worn or defective wires. If you discover faulty wires, replace the strings entirely. If bulbs are broken or missing, replace the bulbs.

4.  Set up a ladder.  If your home’s gutters are low, you may be able to use a stepladder; otherwise, plan to use an extension ladder. Place it firmly on flat ground and lean it against the gutter, or better yet, use a ladder stand off / stabilizer like Ladder-Max to make your experience on a ladder as safe and secure as possible.  If you must lean the ladder against the gutter, place a short piece of 2 by 4 inside the gutter to reinforce it.

5.  Hang the lights along the gutters.  Your objective is to hang lights as easily and safely as possible without damaging your home’s trim or walls.  Attach the wire of the string of lights to the clip side of the hanger.  Hangers should be placed approximately every 12 – 18 inches.

6.  Plug in the lights and start belting out Christmas Carols to celebrate a job well done!

Merry Christmas & Happy New Year!
GutterBrush Guys Ltd.

www.GutterBrush.com

888-397-9433

This is the time of year when a cold snap can come in anytime and catch you by surprise if your home is not yet prepped for winter.  Here are nine things to check in preparing your home for the coming winter season.

1. Heating System: Your home’s heating system is the front line of defense in keeping your home warm. You need to make sure the furnace or boiler is working before you need it.
2. Air Conditioner: Your window air conditioner or central air conditioner condensing unit needs a little prepping too in order to make it through the winter. You need to prepare the condensing unit for storage including cleaning our leaves and covering the condenser.
3. Chimney and Fireplace: A wood burning fireplace and chimney can be a major source of cold air leaks and other issues in winter. Make sure to check and inspect your fireplace, including making sure the flue operates properly and checking your firebrick.
4. Plumbing: Burst pipes from freezing can cause some of the most expensive repairs in the home. Make sure you protect your plumbing from freezing with techniques such as heating and insulating your pipes. It is also critically important to remove your hoses from any outside faucets.
5. Insulation: The simple process of insulating can reduce energy costs. this includes getting an insulating blanket for your water heater, foam sealing gaskets for outlets and blocking fireplace drafts with a piece of fiberglass insulation.
6. Weather-stripping: An easy way to reduce you heating bill from infiltration is to reduce these drafts of doors and windows with simple weather-stripping.
7. Roof and Gutters: Check your roof and gutters for leaves and debris. Frozen wet leaves in gutters are major source of damage. Protect your gutters with a gutter protection system like GutterBrush.
   
8. Sprinkler System: Another key element of your home winterization plan is winterizing your sprinkler system to prevent your lines from bursting.
9. Landscape: Lastly comes preparing your landscape and equipment for the winter including outdoor deck, furniture and lawn equipment preparation.

By taking a few hours and preparing your home for winter you can get closer to a trouble free winter and just sit back and enjoy the scenery!

We do not know anybody who likes cleaning rain gutters on their property. It’s time consuming and often, frankly, completely nasty, especially if you do not keep up with it on a somewhat regular basis. If you are like many homeowners and think “I’ll take care of that next weekend”, you could end up with massive clogs in your gutters and downspouts…clogs which will cost hundreds of dollars to repair because you have to call a gutter professional to come out, take down your downspouts, clean them out and put them all back together. Instead of spending all of that time and money, why not just install a gutter brush?

The original gutterbrush simple gutter guard will save you time and you won’t have to worry about costly clogs in your downspouts. The product looks like a giant pipe cleaning brush and it sits in your rain gutter channel and acts as a barrier for leaves, twigs, seedpods and other debris while still letting water pass through freely and out the downspout.

Installation is simple and fast. The most difficult part is climbing the ladder up to your roof to set the original gutterbrush down inside of it. But that’s it…you’re done! More importantly they are easy to clean if you ever need to do so. All you have to do is climb back up that pesky ladder; pull the brushes out, remove the debris and put them right back into place.

Why spend a bunch of money if you don’t have to? Why spend a bunch of time cleaning something if you don’t have to? The original GutterBrush is very affordable and you can install it yourself in about an hour and a half and it lasts all year (studies have proven they can also keep your gutters from freezing in the winter). Sounds like a win-win situation to me.

Don’t be fooled by imitations that are manufactured outside of the USA using sub standard materials. Insist on the original GutterBrush SImple Gutter Guard!

visit www.gutterbrush.com for more information about this great product.

Do you need a new roof? Are you trying to decide how to save some money on the job? One way people try to do this is to place the new roof installed over an existing layer of roofing. This technique is quite common in many areas and many roofing contractors don’t see any problem with this method and have no problem trying to sell homeowners on a lay-over or go-over as this technique is called.

Don’t do this. EVER.

Here are the top five reasons laying a new roof over an old one is a terrible idea.

First, there are sure to be areas that have or had leaks and they can’t always be addressed properly

There is a good chance that your old roof had some problem areas including possible leak spots, whether you noticed them or not. Without tearing off the old roof and properly identifying these types of trouble spots and determining where the leak was coming from and traveling to it is impossible to tell what areas of your roof may need some special attention.

Second, any rotted wood under the existing roofing will only get worse leading to an even more expensive fix down the road.

There could be areas that have rotted wood hiding under the old roofing. These rotted areas need to be identified and replaced before a new roof is installed. Obviously if your roofing contractor is only doing a lay-over roofing installation then these rotted areas will remain covered up and only get worse as the years go on. Also the nails holding down the shingles in areas with rotted wood cannot properly do their job and you have a much higher risk of shingles blowing off in those areas.

Third, the eaves, rakes and valleys always need special treatment and not doing so will cause more costly repairs later.

This is a big one. The eaves, rakes and valleys of your house need special attention when your home’s roof is being installed. This is especially important in colder climates like Massachusetts, where we are located. In the winter time the eaves of your house are under attack by Mother Nature, whether it is through ice dams, snow build up, or just the constant freezing and thawing that occurs throughout the winter season. When a new roof is properly installed the roofing contractor needs to put new aluminum drip-edge around the entire perimeter of your roof.

Next they need to apply a 3 foot wide section of ice & water barrier around the perimeter as well as in any valleys on your roof. Then they can begin to install the new roofing. Without tearing off the original roofing there is no way to properly install the new drip-edge or ice & water barrier. On a lay-over type of roofing install, the roofing contractor is counting on the existing products on the home’s roof to still be up to par and be able to handle the winter conditions. All too often the old products fall short whether it was because they have outlived their lifetime, were sub-par to begin with, or maybe they were never there to begin with (all to often the latter is the case with ice & water barrier).

Fourth,  the extra roofing weight is no good for old rafters and can cause structural failure and safety hazards in the structure.

One of the more obvious problems with a lay-over re-roof is the added weight of the extra layer of shingles. On most newer homes this is not an issue, however many older homes have rafters that are considered undersized by today’s framing standards. It is not uncommon to see 2×6 rafter systems on many of these houses. Now in most situations a 2×6 rafter is undersized to begin with and you certainly don’t want to be adding the weight of a new roofing layer on top of an old roofing layer to these already undersized rafter systems.

Fifth, adding a roof on top of another roof will lead to a shorter roof life expectancy.

Most responsible roofing contractors agree that a lay-over roof will decrease the new roof’s lifetime by about 25%. This fact alone means that any money you might have saved by doing a lay-over, as opposed to a tear-off and new roof install, was only a short term savings. In addition, you now have 2 layers of roofing that will need to be removed the next time your roof is done and that will also add more cost to the job

Tearing off the old roof and then installing a new one is always superior to laying a new on on top of an old one. And as always, do not forget your gutter protection system needs!

Rain barrels

Residential water use increases 40 to 50% during summer months due to outdoor water use. Stormwater runoff is the leading type of residential non-point source pollution.

What is a rain barrel?

A rain barrel collects and stores rainwater from rooftops to use later for lawn and garden watering.

Water collected in a rain barrel would normally pour off your roof directly or flow through gutterbrush and roof gutter downspouts and become stormwater runoff.

Depending on your yard, this runoff can travel onto paved surfaces and eventually into a storm drain.

54 gallon, green plastic rain barrel with screened cover and outlet hose. Also comes with overflow hose and linking kit to connect a set of two.

Why Use Rain Barrels?

• Rain barrels conserve water and help lower costs (a rain barrel can save approximately 1,300 gallons of water during peak summer months).
• Rain barrels reduce water pollution by reducing stormwater runoff, which can contain pollutants like sediment, oil, grease, bacteria and nutrients.
• Rain barrels are inexpensive and easy to build and install.

A rain barrel can be used to save water for plants during dry periods. Rain barrels can also be arranged to slowly release the collected rain fall to areas that can soak up the water, reducing stormwater runoff and increasing groundwater recharge.

Operation and Maintenance
Rain barrels should be drained and removed for the winter months to prevent ice damage. It is recommended that you remove the existing downspout and elbow intact and store for reinstallation in the late fall. You can then add another downspout section that will need to be custom cut to an appropriate height above your rain barrel. Two, connected downspout elbows (forming an S shape) or hinged extension should sit about two inches above the rain barrel inlet hole. Fine mesh screen should be used to cover any openings in the rain barrel to prevent mosquitoes and to trap debris. Rain barrels can be installed upon blocks or wooden crate to provide height for gravity flow purposes.

Where to purchase?
Ready-made rain barrels range from $89 to $135 each depending on size, style and added features. For local suppliers, inquire at your local home and garden supply store, garden center, nursery, or hardware store.

You can also do an internet search on rain barrels and gutterbrush.

What’s most likely to destroy your home?